Lancom R&S Unified AGPO150 Migration Manual page 11

If the upgrade fails or the device reboots and the old version is still installed,
please refer to the log files for further information.
For information on how to access the web client of the LANCOM
R&S Unified Firewall, refer to chapter "First steps" on page 15.
®
4
If you are using a device with less than 4 GB memory, re-enable the
required UTM settings. Not all UTM settings can be active on these
devices at the same time. For more information, refer to the LCOS
FX user manual. .
Upgrading the LANCOM R&S
versions 9.4 and 9.5
For upgrading the LANCOM R&S
9.5 the following options are available:
A Option 1 (recommended): Installation of LCOS FX 10.4 from a USB stick.
A Option 2 (not recommended): Upgrade of the LANCOM R&S
Firewall to version 9.6 with a subsequent upgrade to LCOS FX 10.4.
10
LANCOM Installation Guide – Upgrade procedure
Unified Firewall from versions 9.4 and
®
Unified Firewall from
®
Unified
®