Advertisement
FUNCTION
VERIFYING THE DIALING
MODE (TONE/PULSE)
CHANGING THE DIALING
MODE (TONE / PULSE)
TEMPORARY CHANGE OF
DIALING MODE (TONE /
PULSE)
SETTING THE RINGER
VOLUME / MELODY
REDIAL
MUTE
FLASH
STORING A PHONE NUMBER
IN ONE-TOUCH MEMORIES
USING ONE-TOUCH
MEMORIES TO MAKE A CALL
STORING A PHONE NUMBER
IN TWO-TOUCH MEMORIES
USING TWO-TOUCH
MEMORIES TO MAKE A CALL
Quick Reference Guide
PROCEDURE
• Press any numeric key. If you still hear the dialing tone, change to
the other dialing mode.
• The switch located on the bottom of the telephone allows three
different settings:
P
PULSE
T1 TONE with 100 ms flash
T2 TONE with 250 flash 250 ms or 600 ms flash
(depending on the telephone model)
After establishing a call, change to TONE by pressing the
key (for example to use telebanking services).
Lift the handset
+
Press the MUTE key followed by the
...
Press one of the keys
Press the MUTE key
Replace the handset
To redial the last number dialed, press the REDIAL key
When the MUTE key is pressed during a call, the handset
microphone will be disabled. To resume a normal
conversation, press the MUTE key again.
Press the FLASH key to access a number of special
features (follow-me, call waiting, conference, etc.).
Lift the handset and press the MUTE key
+
Press the desired one-touch memory key
...
Enter the phone number to be stored
Press the MUTE key
Lift the handset
Press the desired one-touch memory key
Lift the handset and press the MUTE key
+
Press the MEM key
...
Press the desired memory number (
...
Enter the phone number to be stored
Press the MUTE key
Lift the handset
Press the MEM key
...
Press the desired memory number (
24
key
to
to
)
to
)
Advertisement
