Force Device Into Bootloader Mode; Cleanswitch; Tbs Unify Pro32 Hv (Mmcx); Tbs Unify Pro32 Nano - Team Blacksheep TBS UNIFY PRO32 5G8 nano Manual

CleanSwitch
A new feature introduced with the TBS UNIFY PRO 5G8 is CleanSwitch. When video transmitters power up
or change frequency, they usually send a burst across the entire band which disturbs fellow flying pilots.
All UNIFY PRO32 5G8 video transmitters will remain in their lowest power output (less than 0.1mW) while
changing channels and powering up. This ensures interruption-free racing, even with multiple video
transmitters changing channels, or powering up. Despite all this, TBS UNIFY PRO & EVO are still the fastest
video transmitter on power up - thus ensuring it is the perfect choice for any application where quick
channel changes are a necessity!
Force device into bootloader mode
In some rare cases it can be required to force the device into bootloader mode. This can be done by simply
bridge 2 pads on the unit then power up. For regular operation this will not be required.
Please follow the diagram below:
● TBS Unify Pro32 HV (MMCX)
● TBS Unify Pro32 Nano
17