Safety Procedures And Warnings - Aerotech ANT95R Hardware Manual

Electrical Safety

Safety Procedures and Warnings

This manual tells you how to carefully and correctly use and operate the ANT95R.
Read all parts of this manual before you install or operate the ANT95R or before you do
l
maintenance to your system.
To prevent injury to you and damage to the equipment, obey the precautions in this manual.
l
Aerotech continually improves its product offerings; listed options may be superseded at any
l
time. All drawings and illustrations are for reference only and were complete and accurate as of
this manual's release. Refer to www.aerotech.com for the most up-to-date information.
If you do not understand the information in this manual, contact AerotechGlobal Technical Support.
DAN GER: This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1. Access to the ANT95R and component parts must be restricted while connected to a
power source.
2. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
3. Moving parts can cause crushing or shearing injuries. Access to all stage and motor
parts must be restricted while connected to a power source.
4. Disconnect electrical power before servicing equipment.
5. All components must be properly grounded in accordance with local electrical safety
requirements.
6. Operator safeguarding requirements must be addressed during final integration of
the product.
WARN IN G: To prevent damage to the equipment and to decrease the risk of electric shock
and injury, obey the precautions that follow.
1. Cables can pose a tripping hazard. Securely mount and position all system cables to
avoid potential hazards.
2. Do not expose this product to environments or conditions outside of the listed spe-
cifications. Exceeding environmental or operating specifications can cause damage
to the equipment.
3. The ANT95R stage actuator unit must be mounted securely. Improper mounting
can result in injury and damage to the equipment.
4. Use care when moving the ANT95R stage actuator unit. Lifting or transporting the
ANT95R stage actuator unit improperly can result in injury or damage to the
ANT95R.
5. If the product is used in a manner not specified by the manufacturer, the protection
provided by the product can be impaired and result in damage, shock, injury, or
death.
6. Operators must be trained before operating this equipment.
7. All service and maintenance must be performed by qualified personnel.
6
ANT95R Hardware Manual
www.aer otech.com