Service Devices; Product Specific Devices - Nokia 2228Arte Service Manual

RM-377
Service Devices and SW Update

Service Devices

Product specific devices

The table below gives a short overview of service tools that can be used for testing, error analysis and repair of
product RM-377,
Issue 0.3
MJ-197
This device holds the PWB during testing. It has a serial port interface
to connect to the service software.
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
SS-177
This jig is used when replacing the domesheet on the PWB to ensure
correct alignment.
PK-85
This device ("dongle") is required when using the Level 3 service
software. It has a USB connector. This dongle is not interchangeable
with existing Nokia dongles.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Module Jig
Universal Soldering Jig
Domesheet Alignment
Jig
SW Protection Key
Dongle
Page 2-5