Description On Installation - Balboa BP6013G1 Installation And Directions Of Use

Ⅴ. Description on Installation:
The position of electric box(power supply switch) and drain is various according to
different SPA models.
1) Please reserve an independent - controlled electric leakage switch before installing the SPA and reserve
power cord no less than 3*6mm
needed. If customer requires 380V power supply, please reserve the 380V leakage switch and power cord at
least 5*4mm and two group of power cord at least 5*6mm
2
2) 1 inch soft pipe for connecting the drain of SPA is needed before installation.
Power cord of SPA
1）Balboa control system (BP6013G1&BP6013G2&BP6013G3）
Panels
Customer: Balboa Water Group
Part Number: 56826-02 800 Incoloy 3kW
56827-02 Titanium 3kW
Custom Box Overlay □
Box Overlay Part Number N/A
CE System Model For 3.0kW: BP21-BP6013G2-RCA3.0K
Software Version ID: M100_226 V37.0
Software Version: 37.0
File Name: BP6013_37.0_BP6013G2.hex
Configuration Signature: F71FE5EB
Eng. Project Number: 4890
Control Panels:
TP600 Version 2.7 and later (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)
TP400T CE Version 2.7 and later (TP400T US should not be used) (Version 2.12 or later required for bba™/bba™
Electric box
2 On/Off control via menu)
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50/60Hz*, 1þ, 32A, (Circuit Breaker rating = 40A max.)
Dual Service N/A
3-Service [5 wires (line 1, line 2, line 3, neutral, ground)]
230VAC line-to-neutral**, 50/60Hz*, 3þ, 16A, (Circuit Breaker rating
= 20A max each phase line.)
* BP systems automatically detect 50Hz vs 60Hz.
** 3-phase service measured line-to-line will read about 400V, but BP
systems do not use it line-to-line.
IMPORTANT - Service must include a neutral wire, with a line to
neutral voltage of 230VAC.
2 . For big swimming SPA, at least two group of power cord 3*6mm
TP600 panel
Controller BP6013G1/G2/G3 Tech Sheet
- 34 -
for big swimming SPA.
2
TP400 panel
2 is