Sony DSC-HX350 Service Manual page 41

5. Peel off the Main Flexible Board from the Fixed Stationary Tube Assy.
Adhesive Tapes
6. Remove the three screws to detach the Z Motor.
7. Disconnect the Vibration Absorption Flexible Board from the connector on the Main Flexible Board.
8. Peel off the Main Flexible Board from the Fixed Stationary Tube Assy.
Z Motor
9. Remove the six screws to detach the Rear Mirror Assy.
10. Turn the Naruto Gear counterclockwise to extend the lens.
11. Draw the F Flexible Board and the Vibration Absorption Flexible Board inside the Fixed Stationary Tube Assy.
DSC-HX350
Main Flexible Board
Fixed Stationary Tube Assy
Vibration Absorption
Flexible Board
Main Flexible
Board
Fixed Stationary
Tube Assy
Adhesive Tape
Rear Mirror Assy
4-21