Self-diagnosis Code
Block
Detailed
Function
Code
E
9 5
0 0
*1
E
9 5
0 1
E
9 5
0 2
*1
*1:
Function of this code is not provided in this unit.
DSC-HX350
Symptom/State
GPS hardware error
Acceleration sensor hardware error
Electronic compass hardware error
(GPS hardware error)
Correction
Check the signal line connection for GPS.
When there is no problem with the connections, replace the
board that contains this peripheral circuit.
Turn power off and turn power on again. When this error is
not cleared, the peripheral circuit of the acceleration sensor
may be faulty.
Replace the board that contains this peripheral circuit.
The peripheral circuit of the electronic compass may be
faulty.
Replace the board that contains this peripheral circuit.
1-3