Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Blade Operation
1. Plug in the housing base and place the work
bowl on top, with the work bowl handle just to
the left of center. Turn the work bowl counter-
clockwise to lock it onto the housing base.
2. Carefully lift and place the chosen blade over
the work bowl center hub. Line up the mark-
ings on the blade hub with the motor shaft. It
should fit snugly and rest on the bottom of the
work bowl.
3. Add desired ingredients to work bowl.
4. Place work bowl cover onto work bowl, with
the handle area just to the left of center. Turn
counterclockwise to lock onto work bowl.
5. Align pusher assembly and activating rod with
the feed tube opening on the work bowl cover
and slide the activating rod down to the bottom.
6. You are now ready to operate the machine.
Disc Operation
1. Plug in the housing base and place the work
bowl on top, with the work bowl handle just to
the left of center. Turn the work bowl counter-
clockwise to lock it onto the housing base.
2. Choose desired disc and place underside-up on
tabletop. Pick up detachable disc stem and
align it with the raised plastic crescent on the
disc underside. The raised 'lock' indicator on
the left corner of the stem should be to the left
of the mounting plate on disc.
3. Turn the stem to the right, so the locking tabs
are covered by the metal supports and a 'click'
locks the stem in place.
4. With the stem facing down, place the assembly
over the center hub. It should fit snugly and rest
on the bottom of the work bowl.
5. Place work bowl cover onto work bowl, with
the handle area just to the left of center.
Turn counterclockwise to lock onto work bowl.
6. Align pusher with the feed tube opening on the
work bowl cover and slide the activating rod
down to the bottom.
7. Use the cord wrap on the housing base
underside to add or remove cord.
8. You are now ready to operate the machine.
MACHINE FUNCTIONS
PULSE
1. With the machine properly assembled
and engaged, and ingredients in the work
bowl, press the PULSE button repeatedly,
as needed.
ON (Continuous)
1. Properly assemble and engage the machine.
2. To add ingredients through the feed tube,
remove the pusher and fill the feed tube as
directed (see Preparing Food for Slicing or
Shredding, page 14).
3. Engage the pusher and press the ON button.
The button light will turn on and the motor
will start.
4. Press the pusher firmly down until all
ingredients have passed into the work bowl.
Remove the pusher and refill ingredients as
needed. When you engage the pusher again,
the unit and light will automatically turn ON.
5. Press the OFF button when finished.
OPERATING
INSTRUCTIONS
Practice chopping some foods such as a zucchini
or potato before you process food to eat. First, cut
the ingredients into 1-inch pieces of even size
and length.
• Place the work bowl over the center stem and
turn counterclockwise to lock in place.
• Insert the metal chopping blade and put
ingredient pieces in the work bowl. Put on the
cover and turn counterclockwise to lock onto
work bowl. Align the pusher and the pusher's
activating rod with the corresponding openings
on the feed tube, and push all the way down.
• Press and release the PULSE button two or
three times. Each time the blade stops, let the
pieces drop to the bottom of the bowl before
you pulse again. This puts them in the path of
the blade each time the motor starts.
• Using the pulse/chopping technique, you get
an even chop without overprocessing. Check
7
Hide quick links:
Advertisement
Chapters
Table of Contents
