Sunbeam's Safety Precautions - Sunbeam CAFE LC9000 Instruction/Recipe Booklet

Sunbeam's Safety Precautions

SAFETY PRECAUTIONS FOR YOUR SUNBEAM
FOOD PROCESSOR LC9000.
cutting discs. These are extremely sharp and may
cause injury if handled incorrectly. Always store
blades and cutting discs in their respective covers
or processing containers.
putting on or taking off attachments, and before
cleaning.
Cool to room temperature before placing in
processing bowl.
processor before fitting any attachments.
Sunbeam is very safety conscious when designing and
manufacturing consumer products, but it is essential
that the product user also exercise care when using
an electrical appliance. Listed below are precautions
which are essential for the safe use of an electrical
appliance:
with an appliance.
you insert or remove a plug. Remove by grasping the
plug - do not pull on the cord.
appliance is not in use and before cleaning.
unless this cord has been checked and tested by a
qualified technician or service person.
voltage (A.C. only) marked on the appliance.
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
not play with the appliance.
when the appliance is operating.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
care before cleaning.
recommended in the operating chart.
processing bowl of its contents.
when processing heavy loads. None of the recipes
in this manual are considered a 'heavy load'.
emptying the bowl or during fitting and removal of
blade system, as blades are extremely sharp.
other than its intended use.
flame, electric element or on a heated oven.
the edge of a table or bench top or touch any hot
surface.
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair
or adjustment.
use of a residual current device (RCD) with a tripping
supplying power to your appliances.
liquid unless recommended.
by means of an external timer or separate remote
control system.
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast
type environments.
with
5