Advertisement
Document Title:
Periodic
inspection
maintenance procedure
Profile:
CEX, ECR28 [GB]
Periodic inspection and maintenance procedure
Check before daily operation
Be sure to check the following points before starting the engine every day.
Visual check around engine
Oil leak from the lubrication system
Fuel leak from the fuel system
Cooling water leak from the cooling water system
Damaged parts
Loosened or lost bolts
Fuel, radiator rubber hoses, V belt cracked, loosened clamp
Fuel tank level check and fuel supply
Check the remaining fuel oil level in the fuel tank and refuel the recommended fuel if necessary.
Lube oil level check and replenishment
Checking oil level.
Check the engine oil level with the dipstick, after adjusting the posture of the machine unit so that the engine is
level. Insert the dipstick fully and check the oil level. The oil shall not be contaminated heavily and have appropriate
viscosity. No coolant or diesel oil shall be mixed.
The level shall be between the upper and lower limit lines on the dipstick.
Figure 1
Checking oil level and replenishing with engine oil
1.
Filler port (lube oil)
2.
Dipstick
3.
Upper limit
4.
Lower limit
Engine oil capacity, unit: liter (gal.)
Total volume
Function Group:
and
200
Information Type:
Service Information
Effective volume
Service Information
Date:
2014/4/14
Advertisement
