Advertisement
Document Title:
Precautions
Profile:
CEX, ECR28 [GB]
Precautions
Make preparation as follows before starting engine inspection and service.
Fix the engine on a horizontal base.
Remove the coolant hoses, fuel oil pipes, wire harness, control wires etc. connecting the driven machine and
engine, and drain coolant, lubricating oil and fuel.
Remove soil, oil, dust, etc. from the engine by washing with solvent, air, steam, etc. Carefully operate so as not to let
any foreign matter enter the engine.
Any part which is found defective as a result of inspection or any part whose measured value does not satisfy the
standard or limit shall be replaced.
Any part predicted to dissatisfy the standard or limit before the next service as estimated from the state of use
should be replaced even when the measured value then satisfies the standard or limit.
Function Group:
200
Information Type:
Service Information
Service Information
Date:
2014/4/14
Advertisement
