Table of Contents
Advertisement
SE 2223/3223 Scan Engine Integration Guide
Length Within Range - This option allows you to decode a code type within a
specified range. For example, to decode Codabar symbols containing between 4 and 12
characters, first scan Codabar Length Within Range. Then scan 0, 4, 1 and 2 (single digit
numbers must always be preceded by a leading zero). Numeric bar codes begin on
page
9-134. If you make an error, or wish to change your selection, scan the
Cancel
bar
code on
page
9-136.
Codabar - Length Within Range
Any Length - Scanning this option allows you to decode Codabar symbols containing any
number of characters.
Codabar - Any Length
9-80
Advertisement
Table of Contents
