Telos 2101 Series User Manual page 45

•
Move the dark cursor bar to IP Addr using the 6 key and press the Select button.
Press the 5 repeatedly to erase any existing entry for IP Addr.
•
Enter an unique IP address using the numeric keys. You should consult with your
network administrator for IP addresses for the Series 2101 components. Note that
an IP address has 4 numbers (each is between 0 and 255) separated by periods
("."). Either "#" or "*" on the keypad will produce a period. Press Select to
confirm entry.
IMPORTANT TIP!
For configuration purposes, any time the IP address Is being changed, the Studio Interface
reboots Itself automatically.
w
•
Move the dark cursor bar to IP Addr using the 6 key and press the Select
button.
•
Enter a subnet mask using the numeric keys. You should consult with your
network administrator for a subnet mask for the Series 2101 components. Note
that an IP address has 4 number number (each is between 0 and 255) separated
by periods ("."). Either "#" or "*" on the keypad will produce a period. Press
Select to confirm entry.
•
(Studio Interface Only) Move the dark cursor bar to Hostname using the 5 key
and press the Select button. Press the 5 repeatedly to erase any existing entry for
IP Addr.
•
(Studio Interface Only) Enter a unique name for this studio Interface. Each studio
Interface must have a name. This name will be used when selecting a show
configuration from the Desktop Director (see part V). The rule for naming the
Studio Interface is to keep it short and simple, use NO spaces and NO special
characters.
TELOS 2101 USER'S MANUAL
TCP/IP Settings
Audio Settings
↵
IP Addr
Hostname
Subnet
THE STUDIO INTERFACE & ADDITIONAL HYBRIDS
SECTION 2 – STUDIO INTERFACE CONFIGURATION
0.0.0.0
0.0.0.0
PART IV
IV-45