Interlogix ZeroWire Quick User Manual page 2

Displaying Status in a PD6662 system
In a PD6662 system the Status key behaviour has been
modified for greater security. It will be off or red, and not
announce system status when pressed.
To check system status and unlock the screen saver,
enter your PIN code followed by enter:
USER PIN CODE
ENTER
1.
STATUS
Arming in Away Mode
READY STATUS
1.
AWAY
USER PIN CODE
2.
ENTER
EXIT DELAY BEEPS
3.
4.
Arming in Stay Mode
1.
STATUS
2.
STAY
USER PIN CODE
3.
ENTER
4. EXIT DELAY BEEPS
Enter your user PIN
code.
Select Status.
This action unlocks the
screen saver.
Check ready key is
green.
Check status key is
green.
Select the Away Mode.
Leave the premises in
30 to 60 seconds (as
set by the installer).
Close the Final Set
Door.
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors
outside your "stay
mode", have everyone
leave those areas.
Select the Stay Mode.
Stay within the
protected areas.
2 / 4
Arming in Instant Stay Mode
1.
STATUS
Green Flashing Green
STAY
STAY
2.
USER PIN CODE
3.
ENTER
EXIT DELAY BEEPS
4.
5.
Arming in Night Mode
1.
STATUS
2.
STAY STAY
USER PIN CODE
3.
ENTER
4. EXIT DELAY BEEPS
inal door becomes an instant alarm zone.
5.
F
Subsequent presses of the Stay button loop through the
Note:
three Stay Mode states:
Stay Mode Stay Instant Mode
STAY
STAY
rd
The 3 Stay option will be available only if Engineer
Note:
configures Night mode.
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your "stay mode", have
everyone leave those
areas.
Select the Stay Mode
twice.
Or, press Stay button
once when system is
already in Stay Mode. In
this case, you will not be
asked second time for a
PIN code.
Stay within the
protected areas.
Final door becomes an
instant alarm zone.
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your "stay mode", have
everyone leave those
areas.
Select the Stay Mode
three times.
Or, press Stay button
STAY
once when system is
already in Instant Stay
Mode.
Stay within the
protected areas.
Night Mode
STAY
ZeroWire Quick User Guide