Siemens Stratos Outstation Installation Manual page 25

Maintenance
This information may also be delivered as a complete configuration file from Poole engineer-
ing.
After connecting to the router using a laptop, you should be able to browse to its web page
by typing its private IP address into a browsers address bar.
Default Settings to connect to this router:
Router IP Address: 192.168.2.1 (Gateway)
Subnet Mask:
Laptop:
The default Username and password for the Inhand routers are:
Username: adm
Password: 123456
Once logged onto the router the home screen should appear, this shows you the current
state of the router and the signal strength. At this point you would expect the router to have
logged onto the network and be showing the signal strength.
You would also expect the PPP link to show an IP address for the WAN (mobile) side of the
router if it connected to the service provider's network. (Usually a class A 10.xxx.xxx.xxx ad-
dress). This will not appear until the APN and password are entered later in this section.
If you have been supplied a configuration file for the router, or if you are using the Siemens
Default Configuration (See Section Error! Reference source not found.) this can be upload-
ed on the "System" – "Config Management" page. Press the browse button under Router Con-
figuration, browse to the file on your laptop and select the import button. (This page can also
be used to save a copy of a working configuration).
IP ROUTERS INSTALLATION GUIDE 3G OTU
667/CI/45025/000 Rev 4 Unrestricted
255.255.255.0
192.168.2.5
25