Akaso Brave 4 User Manual page 13

EN
13. Motion Detection: Turn Off/Turn On
Default setting is turn off.
Motion detection is the process of detecting a change in the position of an object
relative to its surroundings or a change in the surroundings relative to an object.
Turn on Motion Detection and camera, the camera records video automatically when
it detects a change in the position of an object relative to its surroundings.
14. Photo Resolution: 20MP, 16MP, 13MP, 8MP
Default setting is 20M.
15. Anti-shake: Off/On
Default setting is Off.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion including
cycling, motorcycling, and handheld uses.
16. Burst Photo: 3P/s, 5P/s, 10P/s
Default setting is 3P/s.
Burst captures up to 10 photos in 1 second, so it is perfect for capturing fast-moving
activities.
17. Time Lapse Interval: 0.5Sec/1Sec/2Sec/5Sec/10Sec/30Sec/60Sec
Default setting is 0.5Sec.
Time Lapse Video creates video from frames captured at specific intervals. This
option lets you capture a time lapse event and immediately view or share it as a video.
Time Lapse Video is captured without audio.
18. Continuous Lapse: 3Sec/5Sec/10Sec/20Sec/30Sec/60Sec
Default setting is 3Sec.
This camera takes continuous lapse photo for 60 seconds at most.
11