Table of Contents
Advertisement
Introduction
liberoCONFIG
LI6002Eg
LIBERO Tx is used for monitoring temperature and humidity sensitive goods. Temperature
and humidity limits may be set as alarm criteria and monitored during data logging. If the
LIBERO Tx is connected to any USB port, it automatically generates a PDF report with the
logging results. No additional software is required to read out the LIBERO Tx. The PDF
report is created in PDF/A format and is compliant with the ISO 19005-1 Document Man-
agement Standard which permits long-term archiving of the PDF report without further con-
version.
The LIBERO Tx settings are made with the liberoCONFIG configuration software. During
configuration not only the device settings such as the logging interval, alarm limits and
device behavior can be set, but also the text information and the content of the PDF report
can be specified. The selected settings can be saved as a configuration profile and easily
transferred to other LIBERO Tx.
If there are several LIBERO Tx that are to be configured with the same settings, previously
created profiles can be configured directly with the LIBERO SmartStart application. Trans-
fer is absolutely reliable and safe as no device settings are accessible during this process.
When assigning a profile with the LIBERO SmartStart, previously defined fields can be filled
with monitoring related information such as the transport number, order number, carrier etc.
This permits creation of individual PDF reports.
The data logged with the LIBERO Tx can additionally be analyzed, assessed and com-
mented with the elproVIEWER software.
In addition to the LIBERO Tx that are available for various applications (multiple-use, dry
ice and cryo monitoring, temperature and humidity recording, etc.), the LIBERO Cx device
family provides data loggers optimized for transport monitoring.
A LIBERO PDF REPORT IS A PDF/A ISO STANDARD FILE
ONLY OPEN THE FILE WITH A PDF READER
Always save the LIBERO PDF file directly and without opening it or send it as an
e-mail attachment. Opening and saving the PDF file with a PDF editor can make
embedded data unusable for subsequent processing with elproVIEWER,
elproASSISTANT or liberoMANAGER. The integrity of a PDF report can be
checked with the "Check PDF file integrity" function in liberoCONFIG. The men-
tioned software components run this check automatically.
EN - 7
Advertisement
Table of Contents
