Table of Contents
Advertisement
3.4.8.2
Is used for
transport monitoring
where the products
have been packed or
stored prior the moni-
toring starts.
liberoCONFIG
LI6002Eg
Delay
Use Start Delay
• Loop mode
The delay time starts immediately after the LIBERO Tx has been configured
• Start/Stop mode
The delay time starts after the LIBERO Tx has been started by keypress.
Use Transit Delay
Delay time starts after the LIBERO Tx mode changed from Arrived mode to Transit mode
by keypress.
Minutes / Hours / Days
Data entry field for the delay time
CONFIGURA TION S OFTW AR E
3
EN - 35
Advertisement
Table of Contents
