Daily Use - Electrolux EW8F8669Q9 User Manual

36 www.electrolux.com
11.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
programme, but it is also
possible to start a washing
programme remotely.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote start
and the indicator
the display for a few seconds.
2. Touch the Start/Pause
activate the Remote Start before the
indicator
The indicators
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pause
indicator
blinking, the Remote Start is
not activated, but the set
programme starts.

12. DAILY USE

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
button to start the
button
appears on
button to
stops blinking.
and appear on the
button after the
stops
To remove the Remote Start, tap on the
Remote start button and confirm by
pressing the Start/Pause
The reset position
deactivates the Remote
Start.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door.
button.