Power Cord Safety; Servicing; Health And Safety - Servicing; Software Requirements - Ossila UNIT–X200 User Manual

3.5 Power Cord Safety

Emergency power disconnect options: use the power cord as a disconnecting method
and remove from wall. To facilitate disconnect, make sure the power outlet for this cord is
readily accessible to the operator.

3.6 Servicing

If servicing is required, please return the unit to Ossila Ltd. The warranty will be invalidated if:
• Modification or service has been carried out by anyone other than an Ossila engineer.
• The unit has been subjected to chemical damage through improper use.
• The unit has been operated outside the usage parameters stated in the user documentation
associated with the unit.
• The unit has been rendered inoperable through accident, misuse, contamination, improper
maintenance, modification, or other external causes.
3.7 Health and Safety – Servicing
Servicing should only be performed by an Ossila engineer. Any modification or
alteration may damage the equipment, cause injury, or death. It will also void your
equipment's warranty.

4. Software Requirements

The Ossila SMU is compatible with our Front Panel software which is included with the system. It allows for
simple operation of the SMU and precision voltmeter channels.
Table 4.1 details the minimum computer specifications for the Ossila Front Panel software
Operating System
CPU
RAM
Hard Drive Space
Connectivity
Table 4.1. Ossila Front Panel requirements.
USB 2.0 or newer, Ethernet
Windows 10
Dual-core 2 GHz
2 GB
100 MB
9