Table of Contents
Advertisement
3. Safety
3.1 Warning
•
Do NOT connect external voltage sources to either SMU channel.
•
The absolute maximum input voltage for the Vsense channels is ±12 V. DO NOT apply
input while not powered.
3.2 Use of Equipment
The Ossila Source Measure Unit is designed to be used as instructed. It is intended for use under the
following conditions:
•
Indoors in a laboratory environment (Pollution Degree 2)
•
Altitudes up to 2000m
•
Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The unit is supplied with a 24 VDC / 2A power adapter with a power cord for the country of purchase, in
accordance with European Commission regulations and British Standards. Use of any other electrical power
cables, adaptors, or transformers is not recommended.
3.3 Hazard Icons
The following symbols can be found at points throughout the manual. Note and read each warning before
attempting any associated operations associated with it:
Symbol
3.4 General Hazards
Before installing or operating the Ossila Source Measure Unit, there are several health and safety
precautions which must be followed and executed to ensure safe installation and operation.
8
Table 3.1. Hazard warning labels used in this manual.
Associated Hazard
Electrical shock
Advertisement
Table of Contents
