Escort MAX 3 Owner's Manual page 16

Band Enables
In the factory default setting the suggested radar and laser bands for North America are
monitored and sources of some common false alerts are rejected. It is highly recommended
that you use your MAX 3 in this mode.
If you modify Band Enables then this setting will show Modified. The MAX 3 will also notify you
during the startup sequence with an audible alert.
WARNING: Do not turn off any bands unless you are absolutely certain there are no traffic radar
guns using that specific band in your area.
K Notch
Reduces sensitivity of K band in the frequency range of 24.190 – 24.210 GHz. This is effective at
reducing alerts to certain vehicle collision avoidance systems.
Shifters
(only available when optional ZR5 or ZW5 laser shifters are connected)
Sets the shifter mode of operation. Receive = receive-only mode. Shift4/6/8/10 puts the laser
shifters into receive-only mode after 4/6/8/10 seconds from receiving an alert. After 30
seconds of not receiving a Laser alert, the shifters automatically return to shift mode. You can
also manually put the laser shifters into receive-only mode by double tapping the Mute button
on the detector or SmartCord.
Marker Enables
In the factory default setting, the suggested fixed location alerts are reported. It is highly
recommended that you use your MAX 3 in this mode.
If you modify Marker Enables then this setting will show Modified and only the Markers that
you have selected are reported.
Marking Locations
The MRK button allows you to mark a specific location and label it for future reference.
Once marked, MAX 3 will provide an alert when you reach this area again.
16 | P a g e