Escort MAX 3 Owner's Manual page 10

User Mode
Pilot Mode
Display Color Blue* / Green / Red /
Speed Display
Cruise Alert
Over Speed
Meter Mode
Tones
AutoMute
AutoLearn
Units
Language
Voice
GPS Filter
AutoPower Off / 1 Hour / 2 Hours /
Band Enables
Repeatedly press SEN to cycle through
Band Enables
X Band
10 | P a g e
Advanced*
Novice
Scanning*
Full Word
Amber
On*
Off
20 mph*
Off / 20-160 mph
70 mph*
Off / 20-160 mph
Standard*
Spec
Expert
Simple
Standard*
Mild
Low / Med* / High /
Off
On* / Off
English* / Metric
English* / Español
On* / Off
On* / Off
4 Hours*/ 8 Hours
Default*
Modified
On* / Off
Access and customize all Preferences
Access and customize Units and Display Color
only, all other Preferences are set to factory
defaults
NOTE: Switch back to Advanced Mode to view all
Preferences.
Displays scanning bar and the selected SEN mode
Displays only the selected SEN mode
Set color to match your vehicle's dash display
Displays current speed
Displays vehicle voltage instead of speed
Offers only double beep alert tones below the
specified speed
Alerts when the specified speed is exceeded
Single band with signal strength bar graph
Single band with numeric frequency
Multiple bands with signal strength bar graphs
Simple messages replace alert band and signal
strength bar graphs:
Caution (if traveling below Cruise Alert limit)
Slow Down (if traveling above Cruise Alert limit)
Standard alert tones
Mild doorbell chime alert tones
During an alert, automatically reduces audio to
selected volume level
Automatically stores and locks out false alerts
Units for distance and speed
Language for voice and text
Voice announcements
Enables GPS Filtering of stored false alerts
Powers down unit after specified time
NOTE: If AutoPower is enabled, to save screen life
the display screen goes blank after 30 minutes
without moving. Display screen will turn on
automatically after you reach 10MPH
Default Band Enables
Band Enables have been modified from their
default settings
Press + or – to change the selected Band Enable
on or off