Escort MAX 3 Owner's Manual page 15

the display when a signal has been automatically locked out. AutoLearn needs to encounter the
exact frequency in the same location approximately three times to lock it out. Since some door
openers are turned on and off routinely, some variations may occur. Variations may also occur
with seasonal temperature changes that can affects the frequency that these radar sources
transmit.
MAX 3 will also unlearn signals to protect you from locking out real threats. If a particular signal
is no longer present at a location that was previously locked out, MAX 3 will unlock that signal.
If you prefer, you can turn the AutoLearn feature off.
GPS Filter (TrueLock)
MAX 3 is equipped with a TrueLock GPS Filter to store and lock out, or ignore, fixed location
false alerts in its memory. Common sources of fixed location false alerts are storefront
automatic door openers and motion sensors. The TrueLock GPS Filter will not lock out moving
false alerts that are commonly caused by vehicle's blind spot monitoring and collision
avoidance systems.
Locking Out False Alerts
To manually lock out a fixed location false alert (X band, K band or laser only), press the
MUTE button three times during an alert. Pressing the first time will silence the audio.
Pressing a second time will generate a prompt on the display that will read "Lockout?"
Press a third time to confirm you want to lock this signal out by location and frequency.
A "Stored" message will be displayed. Once a signal has been stored, MAX 3 will not
audibly alert the next time you approach this area but will display the locked-out alert in
grey.
To unlock a signal that has already been stored, press the MUTE button twice while
receiving the locked out alert. The display will read "Unlock?" when pressing MUTE the
first time. Press the MUTE button again to unlock it from memory. The display will read
"Unlocked" to confirm your action.
Note: When the GPS Filter is set to OFF, you do not have access to MAX 3's other GPS-
enabled features (e.g., Defender Database alerts, marking locations, etc.).
AutoPower
This feature automatically turns off MAX 3 after a set period of time to save unnecessary drain
on your battery. This is especially useful if your vehicle has a constant-power ignition. To turn
MAX 3 on again you must press the power button.
Note: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. The display screen will turn on automatically after you reach 10MPH.
15 | P a g e