Summary of Contents for Security Chimneys Secure Temp S2100
- Page 1 Secure Temp ® S2100 and ASHT High-Temperature Factory-Built Chimneys www.securitychimneys.com 800-361-4909 (US) 800-667-3387 (Canada)
- Page 2 This drive for excellence has given rise to the Secure Temp S2100, one of the most popular lines of venting products in North America. These high-quality products ensure that end-users benefit from maximum safety and proven corrosion protection.
- Page 3 SECURITY CHIMNEYS SECURE TEMP 2100 CHIMNEYS FOR WOOD STOVE APPLICATIONS Features Benefits • No screws or other attachments required Twist-Lock stainless steel coupler system with 1-inch overlap • Fast and easy installation with one-eighth of a turn • Provides smoother surface Stainless steel inner lining •...
- Page 4 6" & 8" 8" & 48" 12" & 48" 18" & 48" 24 "& 48" 36" & 48" 48" & 48" Offset 43-7/16" 46-1/4" 50-1/2" 54-3/4" 63-1/4" 71-11/16" Rise 50-15/16" 53-3/4" 58" 62-1/4" 70-3/4" 79-3/16" 3 Security Chimneys | www.securitychimneys.com...
-
Page 5: Installation
Offset support Any fireplaces and controlled combustion units Sq. cathedral 14-3/8" 14-3/8" 14-3/8" support can be connected to the Secure Temp S2100, Cathedral support since it has been certified, independently, to ULC Finish Sq. cathedral 14-3/8" 14-3/8" 14-3/8" support support S629M standards. - Page 6 Prior to installation, consult the detailed installation manual included with the support components. SAFETY Security Chimneys's Secure Temp ASHT chimneys can be installed as close as 2 inches to combustible materials, regardless of the diameter to be used. Radiation shields...
- Page 7 SECURITY CHIMNEYS SECURE TEMP ASHT VENT SYSTEM FOR CHIMNEYS Twist-Lock stainless steel coupler system with 1-inch overlap • No screws or other attachments required • Fast and easy installation with one-eighth of a turn Stainless steel inner lining • Provides smoother surface •...
- Page 8 6" & 8" 8" & 48" 12" & 48" 18" & 48" 24 "& 48" 36" & 48" 48" & 48" Offset 43-7/16" 46-1/4" 50-1/2" 54-3/4" 63-1/4" 71-11/16" Rise 50-15/16" 53-3/4" 58" 62-1/4" 70-3/4" 79-3/16" 7 Security Chimneys | www.securitychimneys.com...
- Page 9 Sq. cathedral SAFETY 60' 50' 45' 35' support Wall thimble 3/8" 3/8" 3/8" 3/8" 3/8" Security Chimneys International’s Secure Temp Finishing 75' 65' 59' -- support ASHT chimneys can be installed as close as 2 Firestop 3/8" 3/8" 3/8" 3/8" 3/8"...
- Page 10 ASHT S2100 Ref. 6EK-2. 7EK Ref. 6XKE, 7XKE Only available in 6" & 7" Diameters. Only available in 6" & 7" Diameters. 9 Security Chimneys | www.securitychimneys.com...
- Page 11 Kits Interior Kit Kit includes: Finishing support with coupler, 2 piece attic insulation shield, and rain cap. Use for interior installations only. ASHT S2100 Ref. 6IK-1 Ref. 6XKI, 7XKI Only available in 6" Diameter. Only available in 6" Diameter. Interior New Construction Kit Kit includes: Finishing support with removable outer trim collar, adjustable insulated attic radiation shield, and rain cap.
- Page 12 S2100 Ref. LA Ref. XLA Ø int. 5" 6" 7" 8" 10" Ø int. 6" 7" 8" 5’ (60”) 11-1/4" 11-1/4" 11-1/4" 11-1/4" 11-1/4" 11-1/4" 11-1/4" 11-1/4" A support must be installed within this area. 11 Security Chimneys | www.securitychimneys.com...
- Page 13 Elbows 15º Insulated Elbow Allows the 15° offset of a chimney. Designed to bypass an obstacle, such as a joist. A maximum of two offsets (4 elbows) is allowed. ASHT S2100 Ref. E15 Ref. XE15 Ø int. 5" 6" 7" 8"...
- Page 14 Ø ext. 7" 8" 9" 10" 12" Ø ext. 10" 11" 12" 9-1/2" 10-1/2" 11-3/4" 13" 15" 13-1/4" 13-1/4" 13-1/4" 4-3/4" 5-1/4" 5-1/4" 6-1/4" 7-1/4" 7" 7-1/2" 8" 5-1/2" 6" 6-1/2" 7-1/4" 8-1/4" 7" 7-1/2" 8" 13 Security Chimneys | www.securitychimneys.com...
-
Page 15: Finishing Support
Tees Insulated Tee Cap (Twist-Lock) Equipped with a Twist-Lock system, it makes it possible to seal the base of an insulated tee when an adjustable wall support (SME or XSME) is used. It can be removed, providing easy access for chimney maintenance and inspection. Its insulation prevents the cooling of chimney gases, especially in exterior installations. - Page 16 Ref. XRCS Ø int. 6" 7" 8" Ø int. 6" 7" 8" 6-15/64" 7-1/4" 8-1/4" 6-1/4" 7-1/4" 8-1/4" 10" 11" 12" 12" 13" 14" 24" 24" 24" 24" 24" 24" 2" 2" 2" 2" 2" 2" 15 Security Chimneys | www.securitychimneys.com...
- Page 17 Supports Reduced Clearance Support Extension This part is designed to extend the height of the Insulated Reduced Clearance Support by 22" when the pitch of the roof is steep. Fits all diameters. ASHT S2100 Ref. SE Ref. XSE Ø int. 6"...
- Page 18 Ref. SM Ref. XSM Ø int. 6" 7" 8" 10" Ø int. 6" 7" 8" 19" 19" 19" 16" 18" 18" 18" 13" 13" 13" 16" 14-1/2" 16" 16" 16" 16" 16" 16" 16" 16" 16" 17 Security Chimneys | www.securitychimneys.com...
-
Page 19: Adjustable Wall Support
Supports Adjustable Tee Support This part supports the chimney at the base of the installation, functioning similarly to the tee support (SM) but with an adjustable base to provide additional wall clearance as needed. This tee support must be installed with the insulated tee cap (TCS) included with the insulated tee. - Page 20 Ø int. 6" 7" 8" Ø int. 5" 6" 7" 8" 10" 8" 8" 8" 8" 8" 8" 8" 8" 4" 4" 4" 4" 4" 4" 4" 4" 2" 2" 2" 2" 2" 2" 2" 2" 19 Security Chimneys | www.securitychimneys.com...
-
Page 21: Anchor Plate
Supports Floor Support Used mainly from a basement, this part supports the chimney on a slab, floor, or joist and also acts as a firestop. It makes it possible to maintain a 2" clearance between the chimney’s outer casing and combustible materials in its path. It includes a tightening collar that locks around the chimney and is secure by self- tapping screws (included). - Page 22 Designed for use in the same applications as a rigid shield where an offset is required. B EXT. ASHT Ref. FS Ø int. 6" 7" 8" A ext. 10-19/32" 11-19/32" 12-19/32" B ext. 10-11/16" 11-11/16" 12-11/16" A EXT. 21 Security Chimneys | www.securitychimneys.com...
- Page 23 Premium Shield Accessories Radiation Shield Connector (Insulated) Used in conjunction with a radiation shield connector support (RSSR) or firestop (RCSP) where the enclosed chimney passes through a ceiling/floor. It attaches to the chimney using 4 screws through brackets. A storm collar must be used at the top in an attic installation.
-
Page 24: Radiation Shield
Recommended for use in cold regions. ASHT S2100 Ref. RSI Ref. XRSI Ø int. 7" 8" 10" Ø int. 7" 8" 16" 16" 18" 18" 18" 3" 3" 3" 3" 3" 13" 13" 15" 14" 14" 23 Security Chimneys | www.securitychimneys.com... - Page 25 Shield Accessories Insulated Wall Thimble Designed to protect surrounding combustible materials when a chimney crosses through a wall horizontally, this shield can be adjusted from 7" to 12-1/2" to adapt to the thickness of the wall opening. A decorative plate painted in matte black provides an interior finish.
- Page 26 This part is supplied with tightening collar and adjustable legs. ASHT S2100 Ref. XBS2 Ref. BS2 Ø int. 6" 7" 8" Ø int. 5" 6" 7" 8" 10" 10" 11" 12" 7" 8" 9" 10“ 12" 60" to 115" 60" to 115" 25 Security Chimneys | www.securitychimneys.com...
- Page 27 Shield Accessories Guy Wire Band Attached to the outer casing of the chimney (secured by bolts), it is designed to hold 3 guy wires. It is recommended for chimneys exceeding the roof by 5’ to 13’ maximum. Wire not included. ASHT Ref.
- Page 28 Use to divert snow around chimney, vent and roof flashing.. Bendable attachment flanges allow it to mount on any roof slope. Constructed of paintable galvanized material. Ships flat for easy assembly. 23” 25” ASHT & S2100 Ref. FSD Universal piece fits all diameters 27 Security Chimneys | www.securitychimneys.com...
-
Page 29: Decorative Accessories
Rain Cap Rain Cap Attached to the top of the chimney, it effectively prevents rain, snow and leaves from entering the opening. Check local codes to determine if a spark arrester (PE) is required. ASHT & S2100 Ref. CC Ø int. 5" 6"... - Page 30 ASHT & S2100 Ref. PD Ø int. 6" 7" 8" 14-3/8" 14-3/8" 14-3/8" 6-1/4" 7-1/4" 8-1/4" 5-1/2" 5-1/2" 5-1/2" 29 Security Chimneys | www.securitychimneys.com...
-
Page 31: Limited Lifetime Warranty
Limited Lifetime Warranty This Security Chimneys International, Ltd. (SCIL) Limited Lifetime Warranty warrants your residential vent and/or chimney system to be free from defects in material and workmanship at the time of manufacture. This Limited Lifetime Warranty includes all components and fittings, except termination caps and Secure Black SW single wall black stove pipe. - Page 32 800-667-3387 or contact infoeng@securitychimneys.com EASHT/S2100 LS304_Catalog_Secure Temp ASHT _S2100_03-25-20_V4 www.securitychimneys.com 800-361-4909 (US) 800-667-3387 (Canada) Security Chimneys International © 2015, 2017 Information published in all Security Chimneys literature is current at time of publication and is subject to change without notice.