Table of Contents
Advertisement
Supports
Adjustable Tee Support
This part supports the chimney at the base of the installation, functioning similarly to
the tee support (SM) but with an adjustable base to provide additional wall clearance
as needed. This tee support must be installed with the insulated tee cap (TCS)
included with the insulated tee.
ASHT
Ref. SMA
Ø int. 5"
6"
7"
A
11-1/2"
11-1/2" 15-1/2"
B
15"
15"
15"
C
26-3/4"
26-3/4" 26-3/4"
D
0 to 5"
0 to 5"
0 to 5"
Adjustable Wall Support
This part supports the chimney at the base of the installation or along a wall or other
vertical surface serving as an intermediate support. It comes with a tightening collar
that locks around the chimney and is secured by two self-tapping screws (included).
The collar rests on a horizontal plate. When used as a base support, it lends itself to
the addition of a Twist-Lock insulated tee cap (TI or XTCI). (Refer to the chart on pg. 4
or 8 for loadbearing capacity.)
ASHT
Ref. SME
Ø int. 5"
6"
7"
A
13"
13"
13"
B
16"
16"
16"
C
26-3/4"
26-3/4"
26-3/4" 26-3/4" 26-3/4"
D
0 to 5"
0 to 5"
0 to 5"
S2100
Ref. XSMA
8"
10"
Ø int.
6"
15-1/2" 15-1/2"
A
18"
15"
15"
B
14-1/2"
26-3/4" 26-3/4"
C
26-3/4"
D
0 to 5"
0 to 5"
0 to 5"
S2100
Ref. XSME
Ø int.
6"
8"
10"
A
15-1/2"
13"
16"
16"
16"
B
15"
C
26-3/4"
D
0 to 5"
0 to 5"
0 to 5"
7"
8"
18"
18"
16"
16"
26-3/4"
26-3/4"
0 to 5"
0 to 5"
7"
8"
15-1/2"
15-1/2"
15"
15"
26-3/4"
26-3/4"
0 to 5"
0 to 5"
800-361-4909 (US)
C
B
A
D
C
B
A
D
| 800-667-3387 (Canada) 18
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
