Table of Contents
Advertisement
Tees
Base Tee
Located at the base of the chimney, it makes it possible to connect the chimney to
a gas- or oil-burning appliance. It is recommended for interior installations only
and must be attached to a flue extension. The galvanized steel base tee comes
complete with a tee cap to provide access for inspection and cleaning. Available in
stainless (TBS).
ASHT & S2100
Ref. TB or TBS
Ø int.
6"
7"
A
23"
24"
B
18"
18-1/2"
C
5"
5-1/2"
D
5-1/2"
6"
Double Base Tee
This component makes it possible to connect two appliances, such as a furnace
and a water heater to the SecureTemp™ ASHT chimney. The galvanized steel
base tee for twin connections comes with a tee cap (TC) to provide access for
inspection and cleaning.
ASHT & S2100
Ref. TBD
Ø int.
6"
7"
A
31"
33"
B
18"
18-1/2"
C
5"
5-1/2"
D
5-1/2"
6"
E
8"
9"
Insulated Tee
Located at the base of the chimney, it provides the horizontal connection to the
appliance. It is recommended for installations where a connector must pass through
an exterior wall because its insulation prevents the cooling of chimney gases. An
insulated tee cap (TCS) is included, which allows easy access for maintenance and
inspection.
The insulated tee cap (TCS) must be secured to the flue extension of the tee support
or adjustable tee support.
ASHT
Ref. TI
Ø int.
5"
6"
7"
Ø ext.
7"
8"
9"
A
9-1/2"
10-1/2"
11-3/4"
B
4-3/4"
5-1/4"
5-1/4"
C
5-1/2"
6"
6-1/2"
13 Security Chimneys | www.securitychimneys.com
8"
25"
19"
6"
6-1/2"
8"
35"
19"
6"
6-1/2"
10"
S2100
Ref. XTI
8"
10"
Ø int.
6"
10"
12"
Ø ext.
10"
13"
15"
A
13-1/4"
6-1/4"
7-1/4"
B
7"
7-1/4"
8-1/4"
C
7"
10"
27"
20"
7"
7-1/2"
10"
39"
20"
7"
7-1/2"
12"
7"
8"
11"
12"
13-1/4"
13-1/4"
7-1/2"
8"
7-1/2"
8"
A
C
B
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
