Security Chimneys Secure Temp S2100 Manual page 6

Secure Temp Secure Temp Secure Temp
®
®
APPLICATIONS
The Secure Temp ASHT is one of the most extensively
used factory-built venting systems in North America. It has
been specially developed for use with oil and gas burning
heating appliances and certified wood-burning fireplaces.
The Secure Temp ASHT high-temperature chimney is
certified by Intertek Testing (Warnock Hersey) to ULC S604
standards and ULC S610 (on wood-burning fireplaces) for
all diameters of 5, 6, 7, 8 and 10 inches.
CERTIFICATION
The Secure Temp ASHT high-temperature chimney is certified
by Intertek Testing (Warnock Hersey) to:
• ULC S604 standards for all diameters of 5, 6, 7, 8, and
10 inches.
• ULC S610 (on wood-burning fireplaces) for all diameters of
5, 6, 7, 8 and 10 inches.
• ULC S629 for wood stove applications in diameters of 6, 7,
and 8 inches.
INSTALLATION
Assembly always requires the male coupler to be positioned
upwards. Size the chimney in accordance with the appliance
instruction manual. Map out the chimney path closest to the
heating unit.
For wood stove applications, a third pipe (premium shield) is
required for inside installation where the chimney is enclosed
between two floors (see premium shield accessories section).
Prior to installation, consult the detailed installation manual
included with the support components.
SAFETY
Security Chimneys's Secure Temp ASHT chimneys can
be installed as close as 2 inches to combustible materials,
regardless of the diameter to be used. Radiation shields
and appropriate supports must be used to maintain a
safe clearance as the chimney passes through floors and
combustible partitions.
Some radiation shields in the Secure Temp ASHT line
have been designed specifically for use with wood-
burning fireplaces. For the use of Secure Temp ASHT with
manufactured wood fireplaces, refer to the instruction of
these products.
ASHT ASHT