Jbat1: Clear Cmos (Reset Bios) Jumper; Flashb1: Bios Flashback+ Button - MSI X370 GAMING M7 ACK Manual

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer but DO NOT unplug the power cord (system under S5/
Soft-off mode)
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Power on the computer.

FLASHB1: BIOS FLASHBACK+ Button

This button is used to activate the BIOS FLASHBACK+ function. Please refer to page 38
for Updating BIOS with BIOS FLASHBACK+.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Overview of Components
29