Testing Menu; Amps Fault Finding Setup - Nokia NSD-6 Disassembly & Troubleshooting Instructions

PAMS Technical Documentation
Note: It is possible to enter a Tx and Rx cable loss separately; however if a single cable is
being used, then both losses should be the same. Also the loss will be different for the
1900MHz band and the 800MHz band: hence, sections for both.

Testing Menu

AMPS Fault Finding Setup

For all AMPS transmitter and receiver testing and troubleshooting select "Testing" and
then "AMPS/Baseband Tuning". This automatically sets the receiver on and the transmit-
ter on Channel 380 Power level 3.
The transmitter power level can be set by selecting the "Power Level". The TX_LIM_ADJ
Issue 1 04/01
Disassembly/Troubleshooting Instructions
Nokia Mobile Phones Ltd.
NSD-6
Page 21