Table of Contents
Advertisement
AUTO PROGRAMS allows you to select one of 20 automatic massage programs. You can
customize some aspects of these programs, such as the massage time and heat setting. The
full list of Auto Programs is below:
HEAT allows you to turn the heat feature on or off in target zones. The default is off for most
automatic programs.
TIME allows you to set a timer for your massage in increments of 10, 15, 20, and 30 minutes. You
can also add 5 minute increments, up to a 30 minute maximum. The default massage time is
15 minutes. This option also shows the Total Runtime, which is the total minutes the chair has
run for the life of the chair.
3D INTENSITY allows you to adjust the depth of the massage node rotation (the 3D massage
effect), from Level 1 (lightest) to Level 5 (deepest), or select Off.
FOOT REST SETTINGS allows you to select whether the air compression and/or rollers in the
foot rest should be On or Off.
REMOTE SOUND allows you to select whether the beeping sounds that alert you to chair
movement and controller selections should be On or Off.
BODY SCANNING
When you select an automatic or custom massage, the chair begins by scanning your body
height to determine where your shoulders are. The sensor will beep for several seconds, during
which time you can adjust the rollers based on the height of your shoulders. Press the UP and
DOWN buttons on the navigation control to change the scanned shoulder height. Once the
beeping stops, the height is set. To reset, you must power down the chair.
To navigate between the options in the Main Menu, use the Navigation
Control's arrow buttons to move up, down, left, and right. Press OK to confirm
your selection. To return to the Main Menu, press the Menu button on the
controller or press the left arrow. The six options on the Main Menu are:
Relieve
Vigor
Renew
Zen
Calm
Bedtime
Rise & Shine
Air Only
Zero G
Extend
Yoga
Stretch
Athlete
Stress Free
Mid Body
Total Body
Upper Body
Lower Body
Neck & Shoulder
Quick
11
Advertisement
Table of Contents
