Table of Contents
Advertisement
SHARPER IMAGE
REMOTE & MASSAGE CHAIR OPERATION
STARTING, PAUSING, AND STOPPING YOUR MASSAGE
- To turn on the massage chair, click on the main power switch on the back of the chair, then
press the Power button on the controller, or on the Quick Access Panel . The chair moves
to its Home position (legrest slightly raised, backrest slightly reclined, rollers in upper part of
backrest), and the Menu Panel on the controller lights up.
- If no selection is made after 3 minutes, the chair will go into sleep mode and the Menu Panel
light will go off. The first press of the Power Button will wake the controller up; the second
press of the Power Button will return the chair to the Exit position. Any button pressed on the
controller will wake the controller from sleep mode.
- To pause the motion and timer, press the Pause Button on the controller, or on the Quick
Access Panel . The chair will enter idle mode. The air cells deflate, but the rollers do not
return to their Home position. Press again to resume your massage.
- To turn off the massage chair, ensure that there are no obstacles under the foot rest and
press the Power button on the controller, or on the Quick Access Panel, or in the Relieve 3D
app. The rollers return to their Home position, all air cells deflate, and the chair moves to the
Exit position. Click off the main power switch on the back of the chair and unplug the chair.
MAIN MENU OPTIONS
When you turn on the massage chair, the Display screen becomes active and displays the
Main Menu.
R
Press
buttons to make selection
OK
10
Advertisement
Table of Contents
