Graphics Display; Switching Beep Sound On/Off - CICLOSPORT CICLOPULS CP 13is Owner's Manual

- training times below the lower limit
values set for the heart rate.
- average heart rate (Av) (changes
every 2 seconds)
- maximum heart rate (MA)
The stored values may be cancelled
in the stopwatch mode (ref.
subsection 5.2).

5.4 Graphics display

The CICLOPULS CP 13is also offer the possibility to
obtain a graphics display of the exertion within the set
heart rate zone in the central part of the display.
The blue segments turn black (from left to right) with a
heart beat within the heart rate zone. The number of black
segments depends on the current heart rate. If all the blue
segments have turned black, the heart rate measured is
higher than the upper limit.
If the heart rate measured is below the lower limit, only the
first two segments will turn black.

5.5 switching beep sound on/off

The CICLOPULS CP 13is heart rate monitor is fitted with
an optical alarm signal:
the heart rate value flashes if the lower or upper heart rate
limits set are exceeded.
and an acoustic alarm signal:
an acoustic alarm sounds if the lower or upper heart rate
limits set are exceeded.
The acoustic alarm signal may be switched on and off in
33