Switching Heart Rate Acoustic Alarm Signal; With Cicloinzone, Or Inputting By Hand - CICLOSPORT CICLOPULS CP 13is Owner's Manual

4.3 Adjustment of heart rate limit values and
switching heart rate acoustic alarm signal on/off
Here it is possible to calculate the personal CicloInZone
(or set upper and lower heart rate limits manual). If these
limits are exceeded, the CP 13is emits an optical alarm
signal (the heart rate display will flash) and (when
activated) an acoustic alarm, too.
Press the Mode button several times
until the stopwatch appears at the
top of the display.
Press and hold the Mode button for
3 seconds. The heart rate acoustic
alarm signal adjustment (WS =
Warning Signal) will flash on the
display.
28
Press the Set button to switch the
acoustic alarm signal either ON or
OFF.
Press the Mode button to store the
value and the date of birth will
appear on the display and the year
will flash.
Change the value displayed with the Set button and store
using the Mode button.
The month will then flash on the
display.
Change the value displayed with the
Set button and store using the Mode
button.
The day will then flash on the
display.
Change the value displayed with the
Set button and store using the Mode
button.