Sata Configuration - Biostar NM70I-847 Manual

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U UEFI BIOS Manual
CPU C3 Report
This item allows you to enable or disabled CPU C3 (ACPI C2) report to OS.
Options: Enabled (Default) / Disabled
CPU C6 Report
This item allows you to enable or disabled CPU C6 (ACPI C3) report to OS.
Options: Enabled (Default) / Disabled

SATA Configuration

SATA Controller(s)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Mode Selection
This item determines how SATA controller(s) operate.
Options: IDE (Default) / AHCI
SMART Self Test
This item allows you run SMART self test on all HDDs during POST.
Options: Disabled (Default) / Enabled
10