Hitachi MCG25 Manual page 18

Multi-Stage Cooking
Your oven can be programmed for up to 2 automatic cooking sequences.
NOTE:
 Auto menu cooking and preheating with convection cannot be selected in the
 multi-stage cooking programme.
 Defrosting can only be set in the first stage.
Suppose you want to set the following cooking program:
Microwave cooking (80% power level for 7 minutes)
twice. "d-2" will be shown on the display.
1. Press
2. Turn to select the defrosting time until "5:00" is shown on the display.
3. Press once.
4. Repeatedly press
until "P80" is displayed.
5. Press
6. Turn to select the cooking time until "7:00" displays.
7. Press
NOTE: After one cooking stage is finished, a beep sound will be heard, indicating
the next cooking stage has begun.
Auto Menu
For the food in the following table, it is not necessary to program the cooking power
and time. Take the following steps:
1. In standby state, turn
below.
2. Press
3. Turn to select the food weight.
4. Press
GB
Defrost (for 5 minutes)
or turn to select the microwave power level
to confirm.
to start cooking.
clockwise to select the desired menu from the table
to confirm.
to start cooking.
17