Machine Storage - Bissell 1400 User Manual

A
fter Cleaning (continued)
4.
Disconnect the cleaning tool from the Spray
Trigger by pushing down on button lock and pull-
ing straight off
(Do NOT twist tools to remove them)
5.
Once removed from the Spray Trigger, all tools
can be cleaned by rinsing under clean running
water. The TurboBrush tool's switch must be in
"SUCTION" position before rinsing under clean
running water.
6.
Check Spray Nozzle for accumulated dirt or debris.
If necessary, clean with soft bristle brush.
M
achine Storage
1.
Wipe all surfaces with a soft cloth.
2.
Wrap Power Cord around the Cord Wrap on the
back of the Little Green.
3.
Wrap Vacuum Flex Hose around the base of the
unit and secure the Spray Trigger.
4.
Store unit in protected, dry area, at room
temperature (40º to 110ºF).
Note: For Little Green TurboBrush Models,
onboard storage for the TurboBrush Tool
has been provided on the back of the unit.
Attach the TurboBrush to the unit by press-
ing it onto the holder firmly until the button
snaps into hole.
w w w . b i s s e l l . c o m
ug603-2302_1400_206.indd 9 ug603-2302_1400_206.indd 9
WARNING:
Keep spray away from face.
Failure to do so may result in
personal injury.
8 0 0 . 2 3 7 . 7 6 9 1
3/6/06 11:40:12 AM 3/6/06 11:40:12 AM
9