Download
Share
Print this page
Anest Iwata iwata SMART JET PLUS Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Anest Iwata Manuals
  4. Air Compressor
  5. iwata SMART JET PLUS
  6. Operating instructions manual

Anest Iwata iwata SMART JET PLUS Operating Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
IS875HT
IS925HT
OPERATING INSTRUCTION MANUAL
IS875HT-925HT-IM-NCB

Advertisement

loading
Need help?

Need help?

Do you have a question about the iwata SMART JET PLUS and is the answer not in the manual?

Questions and answers

Related Manuals for Anest Iwata iwata SMART JET PLUS

Summary of Contents for Anest Iwata iwata SMART JET PLUS

  • Page 1 IS875HT IS925HT OPERATING INSTRUCTION MANUAL IS875HT-925HT-IM-NCB...

  • Page 3: Need Assistance

    NEED ASSISTANCE If you have any issues or warranty service questions, contact your local ANEST IWATA a liate before returning to your place of purchase. ANEST IWATA-MEDEA, INC. ANEST IWATA CORPORATION ANEST IWATA AUSTRALIA PTY LTD. Portland, Oregon U.S.A. Mt. Druitt, NSW...
  • Page 4 WARNING: Using a plug adapter and power converter may cause unit to overheat. Any issues resulting from the use of a power adapter and/or power converter are not covered under the Anest Iwata-Medea warranty.
  • Page 5 EXPLODED DIAGRAM - SMART JET PLUS IS875HT Unpack the compressor and all packaged components. Enclosed you’ll find: a. Smart Jet Plus Compressor (#IS875HT) b. Moisture Filter Regulator c. Airbrush/Spray Gun Holder (with screws) d. Air Hose (#DT I10) e. Adapter Kit (for other brands of airbrush) f.
  • Page 6 EXPLODED DIAGRAM - POWER JET PLUS IS925HT Unpack the compressor and all packaged components. Enclosed you’ll find: a. Power Jet Plus Compressor (#IS925HT) b. Moisture Filter Regulator c. Airbrush/Spray Gun Holder (with screws) d. Air Hose (#DT I10) e. Adapter Kit (for other brands of airbrush) f.
  • Page 7 GETTING STARTED 1. Screw the moisture filter regulator onto 1/4” fitting on compressor. 2. Screw airbrush/spray gun holder onto side metal plate with provided screws. 3. Screw the 1/8” fitting of the airbrush hose onto the airbrush. If you’re using a brand of airbrush other than Iwata, use the appropriate adapter. 4.

  • Page 8: Maintenance

    ENDING A SESSION 1. Release any built up moisture in moisture filter. 2. Turn off the compressor. 3. Release any leftover air by pressing down on your airbrush trigger (being careful of any excess paint) or unscrewing your airbrush from the airhose. 4.

  • Page 9: Troubleshooting

    COMPRESSOR SUDDENLY TURNS OFF The thermal overload switch will turn off the compressor before it overheats. Allow unit to cool down. The switch will automatically reset itself. FOR ANY OTHER PROBLEMS OR ISSUES Contact ANEST IWATA-MEDEA at 503-253-7308 or email at: info@iwata-medea.com...

  • Page 10: Warranty

    Genuine Iwata ©2016 Anest Iwata-Medea, Inc. All rights reserved. The Anest Iwata-Medea logo, Anest Iwata-Medea and Iwata Studio Series are registered trademarks of Anest Iwata-Medea, Inc. Iwata Custom Micron, Iwata Hi-Line and Iwata Eclipse are trademarks of ANEST IWATA Corporation. Iwata, the Iwata logo and NEO for Iwata are registered trademarks of ANEST IWATA Corporation. All other trademarks are the properties of their respective owners.
  • Page 12 w w w . I W A T A - A I R B R U S H . c o m...

This manual is also suitable for:

Iwata power jet plusIs875htIs925ht