Mouse Keyboard Set MK10 English Table of Contents MPORTANT AFETY NSTRUCTIONS Operating Environment Cables Maintenance and care Children Intended Use Batteries RF interface Conformity Disposal of Old Devices ACKAGE CONTENTS NSTALLING ARDWARE Inserting the Batteries Connecting the Wireless Receiver to the Computer...
English Mouse Keyboard Set MK10 Important Safety Instructions Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual in a safe place for future reference. If you sell or pass this device on to another person, it is imperative that you also hand over this manual.
Mouse Keyboard Set MK10 English Maintenance and care Repair is required when this device has been damaged in any way, for example, when cables or housing are damaged, when liquids or objects have entered the housing, when the product has been exposed to rain or moisture, when the product does not work normally or if the product has been dropped.
The range of the radio wave signals depends on the environmental conditions. Conformity This Mouse Keyboard Set MK10 and the supplied accessories have been tested and approved for compliance with the basic and other relevant requirements of the EMC Directive 89/336/EEC, the Low-voltage Directive 73/23/EEC and the R&TTE Directive 99/5/EC.
Mouse Keyboard Set MK10 English Package contents Please check that delivery contents are complete using the list below: Wireless Keyboard Wireless Mouse Wireless Receiver AAA-type batteries, 1.5V (4 pieces, not shown) CD-ROM with driver and software (not shown) User's manual (not shown)
English Mouse Keyboard Set MK10 Installing Hardware Inserting the Batteries First insert the batteries into the mouse and keyboard, as shown in figure below. Take care to insert the batteries into the device observing the correct polarity (+ and – )
Mouse Keyboard Set MK10 English Connecting the Wireless Receiver to the Computer Next, plug the USB connector of the wireless receiver into a free USB port on your powered-on computer. The operating system will detect the new USB device and will automatically install the corresponding driver.
English Mouse Keyboard Set MK10 If the mouse or keyboard is in use, the status indicator (A) will blink signalling there is wireless reception. If the devices do not work after this first synchronization, please repeat steps 1 to 3.
Mouse Keyboard Set MK10 English Installing the Software Insert the supplied CD-ROM into CD-ROM drive your computer. The installation process should start automatically (see figure right). this window does automatically appear, double-click on the "setup.exe" file on the CD- ROM to start manually.
English Mouse Keyboard Set MK10 During installation, files will be copied. Please wait. installation completed. Select "Yes, I want to restart my computer now." And click on Finish. Your computer will restart. As soon as your computer has restarted, you can configure the optical mouse and keyboard using the software.
Mouse Keyboard Set MK10 English This icon indicates that the function "Num Lock" is enabled. Clicking again on the "Num Lock" button will disable this function again. This icon indicates that the function "Caps Lock" is enabled. Clicking again on the "Caps Lock" button will disable this function again.
English Mouse Keyboard Set MK10 Enable changes by clicking the "Apply" button (the window remains open) or by clicking on the "OK" button (the window closes). You can use the slide switch (see marking in figure) to set the double-click speed.
Mouse Keyboard Set MK10 English The Keyboard Configuration Menu In this menu you can assign most of the Hotkey functions on the keyboard. Some Hotkeys have unchangeable system functions assigned, so not all Hotkeys on the keyboard are listed here. Left-click on the icon that corresponds to the Hotkey you want to reassign.