Identifying Jam Locations; Clearing Jams; Avoiding Jams - Sharp MX-B467P Quick Reference

View the Wi ‑ Fi Direct SSID. From the control panel, navigate
•
to:
Settings > > Network/Ports >
> SSID >
•
View the preshared key (PSK). From the control panel, navigate
to:
Settings > > Network/Ports >
> Set PSK >
Connecting using Wi‑Fi Direct
1 From the mobile device, go to the settings menu.
Enable Wi ‑ Fi, and then tap Wi ‑ Fi Direct.
2
3 Select the printer SSID.
4 Confirm the connection on the printer control panel.
Connecting using Wi‑Fi
1
From the mobile device, go to the settings menu.
Tap Wi ‑ Fi, and then select the printer SSID.
2
Note: The string "DIRECT-xy" (where xy are two random
characters) is added before the SSID.
3
Enter the preshared key.
Note: The preshared key is the password.

Clearing jams

Avoiding jams

Load paper properly
•
Make sure that the paper lies flat in the tray.
Correct loading of paper
> Wi ‑ Fi Direct >
> Wi ‑ Fi Direct >
•
Do not load or remove a tray while the printer is printing.
•
Do not load too much paper. Make sure that the stack height
is below the maximum paper fill indicator.
•
Do not slide paper into the tray. Load paper as shown in the
illustration.
•
Make sure that the paper guides are positioned correctly and
are not pressing tightly against the paper or envelopes.
•
Push the tray firmly into the printer after loading paper.
Incorrect loading of paper
4
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load paper that is wrinkled, creased, damp, bent, or
curled.
•
Flex, fan, and align the paper edges before loading.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same tray.
•
Make sure that the paper size and type are set correctly on the
computer or printer control panel.
•
Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:
•
When Jam Assist is set to On, the printer automatically
flushes blank pages or partially printed pages after a
jammed page has been cleared. Check your printed output
for blank pages.
•
When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.