The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
(
step 5 in "Read This First").
t
Light the room and shoot the subject.
•
The image seen through the finder does not indicate the actual recordable
range.
The parallax phenomenon is occurring when the subject is close. To confirm the recordable
•
range, use the screen.
Cannot shoot images in succession.
The internal memory or the "Memory Stick" is full. Delete unnecessary images (
•
"Read This First").
The battery level is low. Install charged batteries or replace with new ones.
•
Unknown pattern appears on the finder.
This is due to the structure of the finder. This is not a malfunction.
•
Viewing images
Refer to "Computers" (page 82) in conjunction with the following items.
Your camera cannot play back images.
Set the mode dial to
•
The folder/file name has been changed on your computer.
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB communication (page 62).
•
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
The image does not appear on the TV screen.
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
your TV (page 54).
Check whether the connection is correct (page 75).
•
The cable for multi-use terminal is connected. Disconnect it according to the correct
•
procedure (page 62).
(Setup) menu to [On] (page 47).
(page 26).
step 6 in
t
81