Choosing Images To Print (Print); Single Images; Index (9 Images) Screen - Sony DSC-P71 Operating Instructions (primary manual) Operating Instructions Manual

Choosing images to
print
– Print mark
Mode dial setting:
You can designate certain images to be
printed.
This is convenient when you want to have
images printed in shops that follow DPOF
(Digital Print Order Format) specifications.
• Print marks cannot be attached to movies
(MPEG MOVIE) or images recorded using
Clip Motion.
• In E-MAIL mode, the Print mark will be
attached to the normal size image that was
recorded at the same time.
• You can attach a print mark to images shot
using Multi Burst mode; all the images will be
printed on one sheet divided into 16 panels.
72

Single images

a Turn the mode dial to
b Display the image you want to
print using b/B.
c Press the MENU button.
The menu appears.
d Select "PRINT" using b/B,
then press the center z.
A (Print) mark will be attached to
this image.
2048
5 5
/
DELETE PROTECT PRINT SLIDE
OK
To delete a Print mark
In Step 4, press the center z again. The
(Print) mark disappears.

Index (9 images) screen

a Turn the mode dial to
.
press the W zoom button once
to switch to the Index (9
images) screen.
b Press the MENU button.
The menu appears.
c Select "PRINT" using b/B,
then press the center z.
The frame around the image selected
turns green.
• You cannot select "ALL".
d Select "SELECT" using b/B,
then press the center z.
The frame of the selected picture
changes to green.
• You cannot select "ALL".
e Select the images you want to
print using the control button,
then press the center z.
A (Print) mark is attached to the
image.
•
SET
and
MENU TO NEXT