Inserting and removing a "Memory Stick"
Bottom
1
, Open the "Memory Stick"
cover.
Slide the cover in the direction of the arrow
to open it.
Label side
Connector
side
2
, Insert the "Memory Stick."
Holding the "Memory Stick" as shown in
the illustration, insert it all the way in until
it clicks.
• Whenever you insert a "Memory Stick," push it
all the way in until it clicks. If you do not insert
it correctly, a message such as "MEMORY
STICK ERROR" will be displayed on the LCD
screen.
Shooting still images
Access
lamp
3
, Close the "Memory Stick"
cover.
To remove a "Memory Stick"
Open the "Memory Stick" cover, then push
the "Memory Stick" to pop it out.
• Whenever the Access lamp is lit, the
camera is recording or reading out an
image. Never remove the "Memory
Stick" or turn off the power at this time.
23