Setting The Date And Time - Sony DSC-P71 Operating Instructions (primary manual) Operating Instructions Manual

Setting the date and time

Mode dial
1
, Turn the Mode dial to
• To change values for the time and the date that
have been previously set, change the Mode dial
to SET UP, choose "CLOCK SET" in "SETUP
1" (page 97), then proceed from Step 3.
• You can also carry out this operation when the
mode dial is set to SCN, , or
2
, Press the POWER button.
.
The POWER lamp lights in green and the
"CLOCK SET" screen appears.
.
CLOCK SET
Y/M/D
M/D/Y
D/M/Y
2002 / 1 / 1 12 : 02
OK
AM
CANCEL
OK
POWER button
CLOCK SET
2002 / 1 / 1 12
OK
3
, Choose the desired order for
the date, the month and the
year using v/V on the control
button, then push the center z.
You can choose from "Y/M/D" (year/
month/day), "M/D/Y", and "D/M/Y".
• If the rechargeable button battery, which
provides the power for saving the time data,
ever loses its charge (page 99), the "CLOCK
SET" screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
Y/M/D
M/D/Y
D/M/Y
: 02 OK
AM
CANCEL
21