Table of Contents
Advertisement
Chapter2
Muti-Media setting
The multimedia setting submenu is used to configure various multimedia
peripherals such as audio and game equipment. If you highlight the literal "Press
Enter" next to the "Muti-Media setting" label and then press the enter key, it will
take you a submenu with the following options:
Onboard Legacy Audio
This field controls the onboard legacy audio.
The Choices: Enabled (default), Disabled.
Sound Blaster
Hardware SoundBlaster Pro for Windows DOS box and real-mode
DOS legacy compatibility.
The Choices: Enabled, Disabled (default).
SB I/O Base Address
Change the SoundBlaster Pro Base I/O Address settings.
The Choices: 220H(default), 240H, 260H, 280H.
SB IRQ Select
Change the SoundBlaster Pro interrupt signal.
The Choices: IRQ5(default), IRQ7, IRQ9, IRQ10.
SB DMA Select
Change the SoundBlaster Pro direct memory access setting.
The Choices: DMA0, DMA1 (default), DMA2, DMA3.
MPU-401
Enable or Disable MPU-401 function.
The Choices: Enabled (default), Disabled.
MPU-401 I/O Address
Change the SoundBlaster Pro MPU-401 I/O address.
The Choices: 300-303H, 310-313H, 320-323H, 330-333H (default).
Game Port (200-207H)
Change the joystick connect port address.
The Choices: Enabled (default), Disabled.
Init Display First
This item allows you decide to active whether PCI Slot or AGP Slot.
The Choices: PCI Slot (default), AGP.
2-19
BIOS Setup
Advertisement
Table of Contents
