Integrated Peripherals - Biostar M7VKG User Manual

Chapter2

2.5 Integrated Peripherals

Figure 5. Integrated Peripherals
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
► OnChip IDE Control
► Muti-Media setting
Init Display First
Onboard FDD Controller
Onboard Serial Port 1
Onboard IR Port
X UART 2 Mode
X IR Function Duplex
X TX,RX inverting enable
Onboard Parallel Port
Onboard Parallel Mode
X ECP Mode Use DMA
X Parallel Port EPP Type
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values
OnChip IDE Control
The chipset contains a PCI IDE interface with support for two IDE channels.
Select "Enabled" to activate the first and/or second IDE interface. Select
"Disabled" to deactivate an interface, if you install a primary and/or secondary
add-in IDE interface. If you highlight the literal "Press Enter" next to the "Onchip
IDE Control" label and then press the enter key, it will take you a submenu with
the following options:
OnChip IDE Channel 0
The chipset contains a PCI IDE interface with support for two IDE
channels. Select Enabled to activate the primary IDE interface. Select
Disabled to deactivate this interface.
The Choices: Enabled (default), Disabled.
Integrated Peripherals
Press Enter
Press Enter
PCI Slot
Enabled
Auto
Disabled
HPSIR
Half
No,Yes
378 / IRQ7
Normal
3
EPP1.9
F6 :Fail-Safe Defaults F7 : Optimized Defaults
2-17
BIOS Setup
Item Help
Menu Level ►