Table of Contents
Advertisement
USER MANUAL - URS600CE AND URS600CESS
WARNING
6 WARNING
WARNING
6 WARNING
WARNING
6 WARNING
WARNING
6 WARNING
6 WARNING
WARNING
WARNING
6 WARNING
WARNING
6 WARNING
WARNING
6 WARNING
BE CAREFUL
BE CAREFUL
6
lease note! Water absorbs more heat than solvents and needs more time to recycle. The URS600CE
P
works well with water, it works faster with solvents.
Please note! Solvents suitable for recycling may be flammable. Set up and follow safe work practices for
storing and transporting flammable solvents.
Please note! One extra Liner Bag is supplied as a spare part, but order new ones before they run out.
Order only recycler bags made by Uni-ram. A package of 10 bags is part number LB900C-10. Other
package sizes are also available.
Please note! It is possible that the residue of some paints remains moist after recycling due to the
composition of the paint. It is not guaranteed that the residue will be dry.
Please note! Do not use abrasive or hard metal tools that could damage the tank when cleaning. This
damage is not covered by the warranty.
6
The URS600CE must be connected either to an explosion-proof ATEX
receptacle using an ATEX explosion-proof plug or by direct connection
to an explosion-proof switch that is suitable for ATEX zone 1 & 2 gas
group IIA (in accordance with the ATEX installation standard EN 60079-
14). Never connect the URS600CE yourself. Always use a competent,
certified ATEX installer.
If your workplace does not comply with ATEX requirements then you
may not use the URS600CE. We advise you to seek advice from an
ATEX expert.
T he URS600CE may only be operated by users who have read and
understood the URS600CE manual and who are familiar with the risks and
work instructions within the company in the context of the safety plan.
Never move the URS600CE during the recycling process. This can lead
to a dangerous situation.
If there are doubts about the safe use of your URS600CE, always contact
your supplier or Uni-ram Corporation before operating the URS600CE.
Only recycle solvent mixtures with a self-ignition temperature above
280°C. For example, any mixture containing nitro-cellulose should not be
recycled because it may self-ignite at 135°C.
At the moment the HEAT light goes out, the solvent and the URS600CE
are still near the boiling temperature. When the temperature drops below
50°C, the cooling fan stops and the FAN LED light goes out. Only then
has the machine cooled down sufficiently such that the safety cover and
the tank lid can be opened safely.
Unplug the power cord or switch off the breaker and "lock" before all
maintenance and service work. Confirm that power to the machine is
off. If the URS600CE is in operation, first follow the steps in chapter 2.3
'Safe shutdown', and then unplug the power cord.
Do not recycle acidic or chlorinated solvents as they can damage the
machine and jeopardize safe operation.
JULY 2019
Advertisement
Table of Contents
