Replacing An Iq4Bike Base - Wow iQ4Bike base Operating Instructions Manual

iQ4Bike base

Replacing an iQ4Bike base

3 Replacing an iQ4Bike base
3.1 Requirements
WOW! Portal started on the PC
3.2 Carrying out an iQ4Bike base replacement
1. Disconnect iQ4Bike base from USB port.
2. Connect a new iQ4Bike base to the USB cable.
The iQ4Bike base is automatically detected by the WOW! Portal.
3. Configure the IQ4BIKE diagnostic tool for wireless data transmission as described in the
tool manual.
Installation and connection
C-4