Page 1
Operating instructions 2112_ENG / Version 17/09/2010...
Page 2
Schliffenstrasse Falkhof 74653 Künzelsau These operating instructions have been issued by WOW! Würth Online World GmbH. All rights, including translation rights, belong to the issuer. This document, including extracts thereof, must not be duplicated without written authorisation from the issuer.
Table of contents Table of contents A Safety Instructions ................... A-1 1 General safety instructions ................... A-1 2 Safety instructions for iQ4Bike base ..............A-1 B Product description ..................B-1 1 Intended use ....................... B-1 2 Scope of delivery ....................B-1 3 Device description ....................
The following points are merely an abridgement which shall not restrict all other safety precautions. Safety instructions for iQ4Bike base In order to avoid incorrect handling or the destruction of iQ4Bike base, please note the following: Check connecting cables/accessories for damage at regular intervals (tool may be destroyed due to short circuiting).
Product description Intended use IQ4Bike base is intended for use on the PC and is required to transfer information between the PC and the IQ4BIKE diagnostic tool. Items of data such as support inquiries, technical information retrievals and software updates are wirelessly transferred between the PC and the IQ4BIKE diagnostic tool.
Device description Device description iQ4Bike base IQ4Bike base is connected to a PC and communicates with the IQ4BIKE diagnostic tool. iQ4Bike base - left front side Designation USB connection for USB cable (2) for the USB port of the PC...
IQ4BIKE diagnostic tool with integrated remote station N O T E An iQ4Bike base must be present at the PC as a remote station for each IQ4BIKE diagnostic tool with integrated remote station. Performing the installation 1. Install WOW! Portal or update the latest version.
Installation and connection Using several iQ4Bike bases 2. Connect the USB cable (2) to the USB port of the PC and to iQ4Bike base (6). 3. Start WOW! Portal. IQ4Bike base is automatically detected by the WOW! Portal.
Page 9
Using several iQ4Bike bases 3. Disconnect the first installed iQ4Bike base from USB cable. 4. Wait until the second iq4bike tool has been connected to the second iQ4Bike base. 5. Repeat steps 2-4 for all additional iQ4Bike bases. 6. If all iQ4Bike bases have been installed at the PC and connected to the relevant iq4bike diagnostic tool, each iQ4Bike base that was previously disconnected must be re- connected using a USB cable.
Carrying out an iQ4Bike base replacement 1. Disconnect iQ4Bike base from USB port. 2. Connect a new iQ4Bike base to the USB cable. The iQ4Bike base is automatically detected by the WOW! Portal. 3. Configure the IQ4BIKE diagnostic tool for wireless data transmission as described in the...
Solution in sequence until the problem is solved. Problem Cause Solution iQ4Bike base not being USB cable not connec- Connect the USB cable to detected by PC. ted. PC and iQ4Bike base.
Care and maintenance General information Care and maintenance Like any electronic tool, iQ4Bike base must also be handled with care. For this reason, please pay attention to the following: Always check all cables/accessories for damage before use. Always use original spare parts.
Subject to the provision of the date of purchase and the tool number, this tool can be disposed of by: WOW! Würth Online World GmbH Schliffenstrasse Falkhof 74653 Künzelsau Tel.: +49 (07940) 15-1770...
General information International Offices International Offices GERMANY CZECH REPUBLIK ISRAEL SERBIA WOW! Würth Online World Würth, spol. s r.o. Würth Israel Ltd. Wurth d.o.o. GmbH Prumyslová zóna Hatohen 2 Pancevacki put 38 Schliffenstraße Falkhof Neprevázka 137 Zone 34 11210 Krnjaca - Beograd 74653 Künzelsau...